Access Point Tenda W12 V2.0 AC1200 Dual Band

i29 AX3000 Wi-Fi6 Long-Range Access Point i29 is designed based on the new Wi-Fi 6 technology. It realizes a bandwidth of 160 MHz and a 5 GHz rate as high as 2.4 Gbps, a rate three times higher than that of ordinary Wi-Fi 5 APs and two times that of ordinary Wi-Fi 6 APs. The application of such new technologies as OFDMA, spatial multiplexing, and MU-MIMO drives the network capacity of a single i29 to 4 times higher. The high-power RF design helps maintain the quality of Wi-Fi signal even over a long distance, so that wireless clients and AP can work under the high-performance Wi-Fi 6 mode. i29 is a perfect choice for such locations as businesses and hotels to deploy high-performance Wi-Fi networks. Model i29 Category Ceiling Dimension Φ250.6*55 mm Interface One 10/100/1000 Mbps Ethernet Port One 10/100/1000 Mbps Ethernet Port (PoE) Button 1*Reset LED Indicator RGB Maximum Power Consumption 15.74 W Power Supply 802.3at PoE Max. Number of Clients 254 Recommended Clients 42 Antenna 4*4 dBi 2.4GHz maximum power 26+/-1.5 dBm 5GHz maximum power 26+/-1.5 dBm Reception Sensitivity 2.4GHz 802.11b -97dBm 2.4GHz 802.11n (MCS7) -75dBm 5GHz 802.11a -95dBm 5GHz 802.11n (MCS7) -75dBm Frequency Range 2.4GHz&5GHz Standard&Protocol IEEE 802.11a/b/g/n/ac/ax Maximum wireless speed 2.4GHz: 574 Mbps 5GHz: 2402 Mbps Bandwidth 20MHz/40MHz/80MHz/160MHz Operating Mode AP Max. No. of SSID 2.4 GHz: 7 5 GHz: 4 Hide SSID Supported OFDMA Supported Beamforming Supported Fast roaming（802.11k/v/r） Supported WEP Supported WPA-PSK Supported WPA2-PSK Supported WPA Supported WPA2 Supported WPA3-ASE Supported Access control Supported Adjustable power transmit Supported Automatic channel Supported AP isolation Supported Guest network Supported Connected clients control Supported RSSI Threshold Supported Weak signal terminal elimination Supported Prioritize 5 GHz Supported VLAN tagging for SSID Supported LED control Supported MU-MIMO Supported Diagnostics tool Supported Reboot at specified interval Supported Schedule Reboot Supported Device management M3 or Tenda Router with AP Controller feature System Logs Supported Firmware upgrade Supported Reboot Supported Reset Supported Backup configuration Supported Restore configuration Supported Default login IP 192.168.0.254 Default Login Username admin Default Login Password admin Operation Temperature -10℃ – 45℃ Operating humidity (10% – 90%) RH, non-condensing Storage temperature -30℃ – 70℃ Storage humidity (10% – 90%) RH, non-condensing